Hurry, Bigbong Epoxy Get Big Discounts On Every Weekends!
Support : bear@bigbong.cn

Cart

Silicone Glue/

Thermal Grease Paste 1.5W/m-k White

Price: $54.99

Thermal Conductivity:>1.5W/M-K
Thermal Impedance:<0.252 ℃-In²/W
Moment Bore Temperature:-50~300℃
Operation Temperature:-30~280 ℃

In Stock:685000

Bigbong 1kg LED Thermal Grease Paste 1.5W/m-k CPU Thermal Compound 1000g White Thermal Grease Compound Adhensive Glue 35oz Silicone Grease Cooling for Coolers Thermal Interface Material.

  • Thermal Conductivity:>1.5W/M-K
  • Thermal Impedance:<0.252 ℃-In²/W
  • Moment Bore Temperature:-50~300℃
  • Operation Temperature:-30~280 ℃
  • Package:1000g

Description:
Thermal grease.
This thermal grease is common type,under normal temperature is grease status ,
due to the best cost-effective advantage,this thermal grease is widely used for CPU/GPU cooler,boards,fans
and board bonding ,led heat sink,TV,
color monitor ,air conditioning ,audio ,cooker, amplifier VCD,DVD communications equipment
and all kinds of high-end electronic products.
Rohs testing report.

Specification:
Model:H-C1880
Color:White
Package:1000g
Thermal Conductivity:>1.5W/M-K
Thermal Impedance:<0.252 ℃-In²/W
Moment Bore Temperature:-50~300℃
Operation Temperature:-30~280 ℃

How to use:
1.Clean the CPU and heat sink surfaces,wipe the surface lightly with a cotton ball or cotton swab dampened with alcohol or our thermal cleanser
2.Place a tiny drop of thermal grease to the center of the cooler base,smear it evenly with scraper or finger cot, best thickness is 0.13~0.15mm
3.Attach the heat sink to the processor and avoid removing the heat sink after installing it.

 

    PersonalBusinessDistributor

    Weight 1 kg
    Dimensions 15 × 15 × 15 cm
    Model

    H-C1880

    Color

    White

    Thermal Conductivity

    >1.5W/M-K

    Moment Bore Temperature

    -50~300℃

    Place of Origin

    Guangdong Shenzhen, China

    1. webadmin

      How to use:
      1.Clean the CPU and heat sink surfaces,wipe the surface lightly with a cotton ball or cotton swab dampened with alcohol or our thermal cleanser
      2.Place a tiny drop of thermal grease to the center of the cooler base,smear it evenly with scraper or finger cot, best thickness is 0.13~0.15mm
      3.Attach the heat sink to the processor and avoid removing the heat sink after installing it.

    Add a Review

    Your email address will not be published.

    Get a Quote ?